Slab Leak Repair in Tucson, AZ

What Is A Slab Leak?

In simple terms, a slab leak is water below concrete that has accumulated due to faulty water or sewer line that was installed underneath it.

As water and sewer lines begin to break down and deteriorate over time, they will inevitably begin to leak. 

While repairing a slab leak is actually an easy process, getting to the leak can prove to be incredibly difficult and is the primary reason to hire a plumber.

Slab leaks cause incredible damage and are usually very costly to fix. It’s important that you use the tips below to determine a slab leak sooner than later.

What Causes a Slab Leak?

As mentioned above, most slab leaks are caused due to time and deterioration. As water flows through pipes it slowly begins to erode them and eventually over time, due to high pressure will cause cracks and leaks.

Other causes of slab leaks include heavy rains where the earth has been eroded away leaving water lines exposed, hurricanes, earthquakes, and fires.

Note: In most instances, the causes of slab leaks are not always controllable and can only be addressed as the problem occurs.

How to Detect A Slab Leak

A leaking water pipe, main or sewer line can leak very slowly for long periods of time and in some cases goes undetected until severe damage has been done.

Expensive Water Bills – Higher than usual water bills are a common sign that a leak is present on your property. Check all faucets, sinks, and pipes in the interior of your house for small drips and leaks before assuming you have a slab leak. If the water bill is extensively high, this is an indication you are losing a large amount of water.

The Formation of Mold, Mildew & Spots – If warm water is present beneath a foundation it can create Mold, Mildew or water Spots & Puddles on the floor of your home or outside the perimeter.

A Cracked Foundation or Slab – If you notice that the foundation of your house is buckling or cracking, you can almost always assume this is a slab leak. The water below your home or foundation is under extremely high pressure, which in turn causes elevation of the floor and subfloors.


How Do You Repair A Slab Leak?

While there are many ways to repair slab leaks, some may be more time consuming and expensive than others. Depending on where your foundation is located, a plumber will choose from one of a few possibilities:

Removing The Foundation or Subfloor – This is most common in newer houses where the pipes are modern and the possibility of corrosion is less than that of a leak. After the subfloor is removed, your plumber will repair the leak or crack with pipe coating (an epoxy-based formula that is water and airtight)

Repiping – Repiping is most used in older homes where leaks have become a reoccurring issue or problem. Because older pipes have most likely been under high pressure for years, repairing them is usually more expensive than replacing them.

Slab Leak Repairs in Tucson, Az

If you’re looking for slab leak repairs in Tucson, Az, Al Coronado Plumbing can assist you in all of your needs. As a company with a 5-star track record for over 35 years, you can rest assured our plumbers can resolve any issues you have pertaining to slab leaks.

Give us a call today to schedule a free on-site consultation at 520-337-9082

Call Now